Environmental Monitoring

RLE’s Facilities Monitoring System (FMS) is a comprehensive monitoring system commonly used to monitor sensitive facilities, critical equipment status and temperature, and environmental sensors. Feature-rich and budget friendly, the FMS is used in data centers, labs, telecommunications facilities, museums, and many other facilities around the world.

The WiNG-T wireless temperature sensor is compatible with the WiNG-MGR and WiNG-BMS.

The WiNG-TH wireless temperature and humidity sensor ca be used with a WiNG-MGR or BMS-WiNG.

The WiNG-CO2 is a single wireless device that measures carbon dioxide, temperature, and humidity.  Tracking changes in air circulation allows you to monitor air handling equipment and quickly detect impeded airflow, stalled fans, leaks, blockages, or clogged filters. Use the WiNG-CO2 to measure air circulation and track building occupancy for the comfort and safety of your building’s occupants.

The WiNG-LD wireless sensor can be coupled with an SD-Z or SD-Z1 spot detector or any of our leak detection sensing cables to detect and report leaks in any facility.

The WiNG-DAP monitors air pressure to help you better understand how air flows around your environment and validate infrastructure and airflow changes. Use the WiNG-DAP to monitor differential air pressure in a wide variety of spaces, including plenum, ducts, and server racks.

The WiNG-DI sensor allows you to take a wired digital input and convert it to a wireless signal that can be implemented into a WiNG-MGR or BMS-WiNG monitoring system. The WiNG digital input sensor accepts one digital dry contact input.

Poor or obstructed airflow can significantly affect cooling performance.  In addition, it will lead to equipment failure.  Wirelessly monitor air velocity with RLE’s WiNG-AIR sensors that monitor air handling equipment and quickly detect impeded airflow, stalled fans, leaks, blockages or clogged filters.

• WiNG-AIR3 measures air velocity at 0-3m/s +/-10%.
• WiNG-AIR4 measures air velocity at 0-4m/s +/-5%.
• WiNG-AIR10 measures air velocity at 0-10m/s +/-5%.

WiNG-MGR is a complete system of sensors, gateway manager, and range extenders monitors your facility for changes in conditions including temperature, humidity, conductive fluid leaks, and dew point and allows you to fine tune your environment to meet energy efficiency goals, maintain optimal equipment performance parameters, and ensure your facility is operating as expected.

The WiNG-MGR receives and aggregates signals from WiNG sensors. This data is displayed on a sleek web interface, accessible from any browser or mobile device. 

The BMS-WiNG leverages RLE’s WiNG wireless sensor technology and allows it to integrate via protocols into any building management system (BMS) or alarm monitoring system.

Pair the BMS-WiNG with RLE’s WiNG wireless sensors to monitor a variety of conditions including temperature, humidity, dew point, and differential pressure, and integrate these sensor readings directly into a BMS or BAS.

The SD spot detector is designed to primarily function with RLE’s FMS environmental monitoring controller for leak detection.  The SD comes with a two-wire open lead that allows it to be wired directly to the controller’s terminal block.